The world’s first ensuite cryo-engine. A dedicated 1°C performance station designed for the luxury high-rise. No tanks, no plumbing.
Instant Mental Edge | Eliminate morning brain fog with a precision 1°C reset.
Independent Setup | A dedicated system that leaves your existing shower untouched.
Apartment Safe | Zero-drill, tool-free, and engineered for compact living.
The new way to experience cold water therapy at home.
Backed by science
Cold exposure research helps explain the powerful cold-shock response.
The June 15 launch batch includes the AED 990 KRYO Immersion Kit.
Designed specifically for KRYO, the Immersion Kit delivers near-freezing water across the face, shoulders, upper back, and torso creating the full cold-shock experience.
Positions the rain panel above the body for fuller front-and-back coverage, without drilling or permanent bathroom changes.
Designed for KRYO’s flow rate to spread near-freezing water across the key cold-shock zones: face, shoulders, upper back, and torso.
Includes PSU, UAE plug, and 5m low-voltage bathroom-side cord, giving you flexible placement while keeping mains power outside the wet area.
Pre-sized for KRYO’s shower setup, giving you a clean connection from the cooling unit to the rail without sourcing extra parts.
Use the KRYO as your morning protocol for 30 days. If you don't feel a measurable increase in your daily focus and energy, we will collect the unit and refund your investment in full. We take the risk; you take the results.
Core product questions, plus the final setup and power details customers ask before ordering.
In Dubai, the cold tap often is not cold. In summer, cold tap water can commonly come out around 35°C-45°C because water runs through rooftop tanks and sun-exposed pipes before it reaches your bathroom.
That is warm water, not cold exposure.
KRYO solves that by creating a controlled 1°C-15°C cold-water reset inside your own shower, independent of your building's tap-water temperature.
KRYO is designed for larger Dubai ensuites, bathtubs, walk-in showers, and wet rooms.
The ideal position is either inside the bathtub or at the end of a walk-in shower. That keeps KRYO close to your existing water source, close to the drain area, and out of the way of your normal shower flow.
The unit footprint is 550mm × 330mm × 375mm and weighs about 8kg. It sits as a semi-permanent appliance and does not replace your existing shower mixer, require renovation, or need new plumbing.
No. KRYO is designed to avoid permanent installation.
There is no new plumbing, no bathroom electrical work, no drilling, no bathroom wall socket required, and no change to your existing shower mixer.
You place the unit, attach the shower rail and aerated rain shower panel, connect the 1m silicone hose, route the 5m 48V cord, fill the reservoir, and power it on. Setup takes about 15 minutes.
Yes. KRYO is designed so no 220-240V mains electricity is used inside the bathroom.
The mains power supply stays outside the wet area and converts household power into isolated 48V DC extra-low-voltage power before it reaches the unit. The bathroom-side connection is low-voltage and sealed for wet-area use.
This is commonly classified as SELV, Safety Extra-Low Voltage, when supplied by a certified isolated power supply. KRYO's 48V DC bathroom-side system sits within the extra-low-voltage range.
There is no wall socket, extension cord, or 220-240V plug inside the bathroom.
Installation requirements may vary by building and country. KRYO should be installed and used according to the supplied instructions and local electrical requirements.
KRYO uses a two-part power setup.
The PSU, or power supply unit, is the external power adapter that converts normal wall power into 48V DC power for KRYO. Think of it like a compact charger-style power brick that stays outside the bathroom.
From there, a 1.5m mains cord connects the PSU to a standard 220-240V wall outlet outside the bathroom, and a 5m 48V bathroom-side cord runs from the PSU to KRYO.
The bathroom-side cord is about 6.5mm in diameter, similar to speaker cord. In most setups, the nearest standard power point should be within about 6.5m of where KRYO will be positioned, measured by the cable route, with the PSU kept outside the wet area.
Setup takes about 15 minutes.
You place KRYO in the bathtub or at the end of the walk-in shower, attach the shower rail and aerated rain shower panel, connect the 1m silicone hose, route the 48V cord, fill the reservoir, and turn it on.
The first cooldown takes 8-12 hours, so your first ice-cold session is usually best from the next morning. After that, KRYO is ready for daily use.
Yes. KRYO has a built-in thermostat. Once it reaches your chosen temperature, the insulated reservoir helps hold that temperature efficiently.
The compressor does not run constantly. It turns back on only when the water moves around 1-2°C outside the desired temperature, then brings it back down again.
KRYO uses a refillable 12L reservoir and typically gives 3-4 sessions before refill, depending on session length and use. Maximum flow is 8L/min, with roughly 2.7-4L used per shower.
Because the ideal location is inside a bathtub or at the end of a walk-in shower, refilling is usually simple. You can usually refill it directly with the existing bath hose, shower hose, or bidet hose, depending on where KRYO is positioned.
If a hose cannot reach directly, a simple water jug is an easy alternative. No chemicals, tub maintenance, or large water changes are required.
